DITL_-8136.txt
Items: (2 entries)
  0:
    Bounds: x1=380, y1=20, x2=440, y2=38
    Type: 4
    Info: 'Cancel'
  1:
    Bounds: x1=70, y1=0, x2=367, y2=52
    Type: -120
    Info: 'The selected device is not responding as an ImageWriter LQ.  Please check the port selection, cabling, and device type.'

DITL_-8137.txt
Items: (9 entries)
  0:
    Bounds: x1=201, y1=264, x2=261, y2=284
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=4, y1=3, x2=169, y2=22
    Type: -120
    Info: 'Paper Path Options Help'
  2:
    Bounds: x1=4, y1=29, x2=442, y2=65
    Type: -120
    Info: 'The Sheet Feeder Options allow you to print the first page of a document on paper from one bin, and the remaining pages on'
  3:
    Bounds: x1=4, y1=62, x2=442, y2=97
    Type: -120
    Info: 'paper from another bin.  This option only works with applications that support multiple bin-selection.  Other applications will print'
  4:
    Bounds: x1=4, y1=94, x2=442, y2=127
    Type: -120
    Info: 'your entire document on paper from the bin you select for the first page.'
  5:
    Bounds: x1=4, y1=134, x2=442, y2=169
    Type: -120
    Info: 'Because envelopes are thicker than cut sheets, do not print both envelopes and cut sheets in the same print job.  To print'
  6:
    Bounds: x1=4, y1=165, x2=442, y2=201
    Type: -120
    Info: 'envelopes, put the paper thickness lever in the appropriate position (typically 4 or 5), and set the Sheet Feeder Options to'
  7:
    Bounds: x1=4, y1=198, x2=442, y2=232
    Type: -120
    Info: 'print both the first sheet and the remaining sheets on paper from bin 1.  When you finish printing envelopes, reset the paper'
  8:
    Bounds: x1=4, y1=229, x2=442, y2=261
    Type: -120
    Info: 'thickness lever to position 1, and make new bin selections before going on to print cut sheets.'

DITL_-8138.txt
Items: (23 entries)
  0:
    Bounds: x1=401, y1=4, x2=461, y2=24
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=401, y1=34, x2=461, y2=54
    Type: 4
    Info: 'Cancel'
  2:
    Bounds: x1=8, y1=4, x2=384, y2=20
    Type: -120
    Info: 'ImageWriter LQ, Paper Path Options'
  3:
    Bounds: x1=348, y1=19, x2=384, y2=23
    Type: -128
    Info: ''
  4:
    Bounds: x1=96, y1=32, x2=192, y2=48
    Type: 6
    Info: 'Automatic'
  5:
    Bounds: x1=216, y1=32, x2=312, y2=48
    Type: 6
    Info: 'Hand Feed'
  6:
    Bounds: x1=401, y1=64, x2=461, y2=84
    Type: 4
    Info: 'Help'
  7:
    Bounds: x1=8, y1=32, x2=88, y2=48
    Type: -120
    Info: 'Paper Feed:'
  8:
    Bounds: x1=8, y1=72, x2=160, y2=88
    Type: -120
    Info: 'Sheet Feeder Options:'
  9:
    Bounds: x1=200, y1=72, x2=240, y2=88
    Type: -120
    Info: 'Bin 1'
  10:
    Bounds: x1=264, y1=72, x2=304, y2=88
    Type: -120
    Info: 'Bin 2'
  11:
    Bounds: x1=328, y1=72, x2=368, y2=88
    Type: -120
    Info: 'Bin 3'
  12:
    Bounds: x1=24, y1=96, x2=176, y2=112
    Type: -120
    Info: 'First Sheet From:'
  13:
    Bounds: x1=23, y1=115, x2=183, y2=131
    Type: -120
    Info: 'Remaining Sheets From:'
  14:
    Bounds: x1=208, y1=96, x2=240, y2=112
    Type: 6
    Info: ''
  15:
    Bounds: x1=272, y1=96, x2=304, y2=112
    Type: 6
    Info: ''
  16:
    Bounds: x1=336, y1=96, x2=368, y2=112
    Type: 6
    Info: ''
  17:
    Bounds: x1=208, y1=115, x2=240, y2=131
    Type: 6
    Info: ''
  18:
    Bounds: x1=272, y1=115, x2=304, y2=131
    Type: 6
    Info: ''
  19:
    Bounds: x1=336, y1=115, x2=368, y2=131
    Type: 6
    Info: ''
  20:
    Bounds: x1=9, y1=163, x2=455, y2=226
    Type: -120
    Info: '*PLEASE NOTE: Some applications treat each page of a print job as the first page.  These applications cannot take full advantage of the Sheet Feeder Options.  Instead, they print each page from the bin you select in the First Sheet From option.'
  21:
    Bounds: x1=7, y1=139, x2=457, y2=154
    Type: -120
    Info: '____________________________________________________________________'
  22:
    Bounds: x1=7, y1=142, x2=457, y2=157
    Type: -120
    Info: '____________________________________________________________________'

DITL_-8161.txt
Items: (9 entries)
  0:
    Bounds: x1=207, y1=280, x2=262, y2=299
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=7, y1=2, x2=123, y2=18
    Type: -120
    Info: 'Print Dialog Help'
  2:
    Bounds: x1=7, y1=24, x2=438, y2=42
    Type: -120
    Info: 'The Print Dialog lets you set Imagewriter LQ print options.'
  3:
    Bounds: x1=7, y1=51, x2=439, y2=84
    Type: -120
    Info: 'Quality:  Best Quality provides letter-quality printing.  For Best Quality you must have fonts in your System file that are three'
  4:
    Bounds: x1=7, y1=82, x2=439, y2=117
    Type: -120
    Info: 'times larger than the fonts you use on the screen.  See the ImageWriter LQ Owner's Guide for details.'
  5:
    Bounds: x1=7, y1=114, x2=439, y2=150
    Type: -120
    Info: 'Faster Quality provides medium-speed printing that is adequate for proofing documents before printing them in Best Quality.'
  6:
    Bounds: x1=7, y1=146, x2=439, y2=181
    Type: -120
    Info: 'Draft Quality is fastest, and is usually suitable for spreadsheets and forms.'
  7:
    Bounds: x1=7, y1=187, x2=438, y2=236
    Type: -120
    Info: 'Head Scan:  Unidirectional printing provides the highest print quality.  Bidirectional printing is about 20% faster, but may cause slight horizontal misalignment.'
  8:
    Bounds: x1=7, y1=243, x2=439, y2=275
    Type: -120
    Info: 'Options:  This button brings up the Sheet Feeder and paper handling options.'

DITL_-8167.txt
Items: (3 entries)
  0:
    Bounds: x1=184, y1=95, x2=247, y2=117
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=11, y1=4, x2=432, y2=54
    Type: -120
    Info: 'This application will not print correctly in DRAFT quality when the printer is used with pull tractor, cut sheet feeder, or hand feed paper.  Some data will be lost during printing.'
  2:
    Bounds: x1=11, y1=57, x2=432, y2=91
    Type: -120
    Info: 'For a complete print job, please select BEST or FASTER quality or use the push tractor and try again.'

DITL_-8180.txt
Items: (3 entries)
  0:
    Bounds: x1=380, y1=4, x2=440, y2=22
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=380, y1=33, x2=440, y2=51
    Type: 4
    Info: 'Cancel'
  2:
    Bounds: x1=80, y1=0, x2=370, y2=50
    Type: -120
    Info: 'The Printer is not responding.  Check the ÒselectÓ switch.  Click OK to continue, Cancel to terminate printing.'

DITL_-8181.txt
Items: (2 entries)
  0:
    Bounds: x1=380, y1=29, x2=440, y2=47
    Type: 4
    Info: 'Cancel'
  1:
    Bounds: x1=80, y1=0, x2=370, y2=50
    Type: -120
    Info: 'Printing is being terminated because the document has a page containing more data than can be printed.'

DITL_-8182.txt
Items: (3 entries)
  0:
    Bounds: x1=380, y1=4, x2=440, y2=22
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=380, y1=33, x2=440, y2=51
    Type: 4
    Info: 'Cancel'
  2:
    Bounds: x1=80, y1=0, x2=370, y2=50
    Type: -120
    Info: 'Please insert the next sheet of paper.  Click OK to continue, Cancel to terminate printing.'

DITL_-8191.txt
Items: (21 entries)
  0:
    Bounds: x1=400, y1=4, x2=460, y2=24
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=400, y1=34, x2=460, y2=54
    Type: 4
    Info: 'Cancel'
  2:
    Bounds: x1=4, y1=4, x2=384, y2=20
    Type: -120
    Info: 'ImageWriter LQ'
  3:
    Bounds: x1=348, y1=19, x2=384, y2=23
    Type: -128
    Info: ''
  4:
    Bounds: x1=4, y1=29, x2=88, y2=45
    Type: -120
    Info: 'Quality:'
  5:
    Bounds: x1=100, y1=29, x2=188, y2=45
    Type: 6
    Info: 'Best'
  6:
    Bounds: x1=210, y1=29, x2=298, y2=45
    Type: 6
    Info: 'Faster'
  7:
    Bounds: x1=310, y1=29, x2=398, y2=45
    Type: 6
    Info: 'Draft'
  8:
    Bounds: x1=4, y1=79, x2=88, y2=95
    Type: -120
    Info: 'Page Range:'
  9:
    Bounds: x1=100, y1=79, x2=188, y2=95
    Type: 6
    Info: 'All'
  10:
    Bounds: x1=210, y1=79, x2=270, y2=95
    Type: 6
    Info: 'From:'
  11:
    Bounds: x1=274, y1=79, x2=306, y2=95
    Type: -112
    Info: ''
  12:
    Bounds: x1=314, y1=79, x2=342, y2=95
    Type: 8
    Info: 'To:'
  13:
    Bounds: x1=342, y1=79, x2=374, y2=95
    Type: -112
    Info: ''
  14:
    Bounds: x1=4, y1=104, x2=88, y2=119
    Type: -120
    Info: 'Copies:'
  15:
    Bounds: x1=100, y1=104, x2=132, y2=119
    Type: -112
    Info: '1'
  16:
    Bounds: x1=4, y1=54, x2=88, y2=70
    Type: -120
    Info: 'Head Scan:'
  17:
    Bounds: x1=100, y1=54, x2=210, y2=70
    Type: 6
    Info: 'Bidirectional'
  18:
    Bounds: x1=210, y1=54, x2=332, y2=70
    Type: 6
    Info: 'Unidirectional'
  19:
    Bounds: x1=400, y1=94, x2=460, y2=114
    Type: 4
    Info: 'Help'
  20:
    Bounds: x1=400, y1=64, x2=460, y2=84
    Type: 4
    Info: 'Options'

DITL_-8192.txt
Items: (20 entries)
  0:
    Bounds: x1=400, y1=4, x2=460, y2=24
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=400, y1=34, x2=460, y2=54
    Type: 4
    Info: 'Cancel'
  2:
    Bounds: x1=4, y1=4, x2=384, y2=20
    Type: -120
    Info: 'ImageWriter LQ'
  3:
    Bounds: x1=348, y1=19, x2=384, y2=23
    Type: -128
    Info: ''
  4:
    Bounds: x1=4, y1=24, x2=60, y2=40
    Type: -120
    Info: 'Paper:'
  5:
    Bounds: x1=68, y1=24, x2=208, y2=40
    Type: 6
    Info: 'À'
  6:
    Bounds: x1=218, y1=24, x2=383, y2=40
    Type: 6
    Info: 'À'
  7:
    Bounds: x1=68, y1=39, x2=208, y2=55
    Type: 6
    Info: 'À'
  8:
    Bounds: x1=218, y1=39, x2=383, y2=55
    Type: 6
    Info: 'À'
  9:
    Bounds: x1=68, y1=54, x2=208, y2=70
    Type: 6
    Info: 'À'
  10:
    Bounds: x1=218, y1=54, x2=383, y2=70
    Type: 6
    Info: 'À'
  11:
    Bounds: x1=4, y1=74, x2=88, y2=90
    Type: -120
    Info: 'Orientation'
  12:
    Bounds: x1=5, y1=93, x2=37, y2=125
    Type: 0
    Info: ''
  13:
    Bounds: x1=45, y1=93, x2=77, y2=125
    Type: 0
    Info: ''
  14:
    Bounds: x1=106, y1=74, x2=211, y2=90
    Type: -120
    Info: 'Special Effects:'
  15:
    Bounds: x1=308, y1=106, x2=431, y2=122
    Type: 6
    Info: '33 % Reduction'
  16:
    Bounds: x1=308, y1=122, x2=430, y2=138
    Type: 6
    Info: '66 % Reduction'
  17:
    Bounds: x1=308, y1=90, x2=431, y2=106
    Type: 6
    Info: 'Full Size'
  18:
    Bounds: x1=221, y1=106, x2=307, y2=122
    Type: -120
    Info: 'Reductions:'
  19:
    Bounds: x1=218, y1=74, x2=399, y2=90
    Type: 5
    Info: 'No Gaps Between Pages'